High quality casting wheels provider: The cosmetic appeal is a major factor in why most people choose to buy alloy wheels. Steel never looks as good as a magnesium or aluminium alloy. And with such a range of custom designs and styles, there’s the ultimate in flexibility to make sure your car looks absolutely awesome. And that’s very important if you’re considering selling your vehicle. A good set of rims can enhance the appeal of your car significantly. And that’s particularly evident when it comes to rust. Traditional steel wheels are susceptible to the elements, and irreversible iron oxide (rust) never makes a car look better. Stained red-brown wheels look awful and degrade quickly. Alloys, on the other hand, are far more rust and corrosion resistant, and much easier to polish to a high shine. Find additional info on https://www.jjjwheel.com/service.

Revolutionize Your Ride: Expert Wheel Installation Tips! During the wheel installation process, the following points need to be noted: Select the right wheel: Before installation, make sure the wheel selected matches the vehicle model and specifications. Different vehicle models may have different wheel sizes, number of bolt holes and offset requirements. Improperly fitted wheels may cause installation problems or affect driving performance. CLEAN WHEELS AND MOUNTING SURFACES: Thoroughly clean the wheels and mounting surfaces before installing the wheels. Use a cleaner or high-pressure water gun to remove dirt and grease from the surface to ensure the wheel is securely mounted.

One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub. Find extra info at https://www.jjjwheel.com/.

The Flow-Forming Process: A Quick Overview: The flow-forming process is a manufacturing technology used to produce high-performance wheels. Using heat and pressure, the inner barrel of a cast wheel is stretched and compressed, enhancing its tensile strength and durability. Flow-formed wheels are an ideal option for car enthusiasts who want the style and strength of forged wheels but do not have the budget for them. With a combination of superb design options and affordability, flow-formed wheels offer an exceptional solution for performance enthusiasts. Additionally, their elongation characteristics and superior shock resistance make them a superior choice over traditional cast wheels. In sum, the flow-forming process is changing the game in the wheel industry as we know it.

Gravity casting: Alloy aluminum is melted into liquid state and poured into the casting mold, after cooling and solidification, cleaning treatment to get the casting with predetermined shape, size and performance, after molding for mechanical processing (deburring, trimming appearance, polishing) and made. The casting wheels product needs to be molded according to the requirements, and the price is lower for mass production.

If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.

The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.

Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel.

Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems.