Disc stack separator manufacturer in China: The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country. Read even more details on decanter centrifuge manufacturer.

The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.

The advantages of centrifugal casting – Using centrifugal casting, parts have greater strength because grain structures are denser. Its mechanical properties are almost equal in all directions, as the process allows for more control over directional solidification. As a result of this increased structural density, the component has a longer life span and is more stress tolerant. The improved structural uniformity and reduced internal porosity of the components also contribute to enhanced part strength.

Disc stack centrifuge is a kind of vertical centrifuge.As a high efficiency,high output,high automation and high-speed precision separation equipment,it can be divided into solid-liquid two phase and solid-liquid-liquid three phase separation,As a two phase separation disc centrifuge,it can separate most solid particles and liquids,As a three phase disc centrifuge,it can separate liquid phase of different densities and separate solids at the same time. It can separate suspensions with a solid concentration of less than 5%. The technical parameter range of disc centrifuge is relatively large, and the diameter of the drum is generally 150 ~ 730 mm. The disc centrifugal separator can provide a better result of separation with a clearer centrate, and can be adopted in more areas with its wide range of technical parameters. See even more info at lnszjx.com.

The use of three-phase separation technologies is rising in the separation industry. When it came to separating oils and water, the industry particularly needed high-efficiency three-phase decanter centrifuges. Shenzhou Machinery Company has over 50 years of experience in the separation field, which they used to develop the 3 Phase decanter centrifuge. Its primary use is in solving the problem of simultaneous immiscible liquid and solid phase separation using the specific gravity difference. The need for stable, continuous operation around the clock can be met by the 3 Phase decanter centrifuge thanks to its mature design and high-quality raw material selection.

Rotating cone angle: the cone angle has a significant impact on the performance of solid flow rate. Due to the effect of centrifugal force, when particles reach the inner wall of the rotary drum and are transported forward by the spiral, they also have a tendency to flow backward. The speed of backward flow is related to the spiral angle, and finally reflected in the cone angle. Both have a direct impact on the conveying performance of solid particles, that is, as the reflux speed increases, the solid conveying speed decreases. The robustness of materials is reflected in the speed of the centrifuge, which directly affects the volumetric flow rate and mass flow rate. In addition, the corrosion of the centrifuge is also related to its material structure.